1. Home
  2. Tubing & Accessories
  3. Peristaltic Pump Tubes
PharMed® BPT Tubing

Product Introduction

  • Wear-resistant, when use in peristaltic pump, its lifetime is 30 times more durable than ordinary silicone tubes.
  • Repeatable high-temperature and high-pressure sterilization (temperature resistance range is -60°F (-51°C) to 275°F (135°C)).
  • Can withstand repeated CIP and SIP (compatible with most commercially available cleaners and disinfectants, and can be exposed to up to 5MRads of cobalt 60 gamma irradiation).
  • Complies with REACH, RoHS, USP Class VI, FDA, NSF 51 and ISO 10993 standards (with biocompatible fluid surface).
  • Three pre-attached tubing clamps form two sections of pump tube pressing surfaces (if one section of pump tube pressing surface fails, there is another section of pump tube pressing surface that can be used).
  • The clamps are dyed in different colors according to the inner diameter of the tubing.

Technical Parameter

Brand Saint-Gobain PharMed® BPT Tubing
Hardness(Shore A) 50-55
Tensile Strength psi(Mpa) 1000(6.9)
Elongation % 375
Tear Strength lb-f/in(KN/m) 120(21.0)
Proportion 0.98
Water Absorption, %24hrs.@23℃ 0.3
Temperature Resistance -59℃~135℃
Constant compression set rate, %22hrs.@70℃ 27

Disinfection Method

High temperature and high pressure sterilization—30 min at 121℃
Gas—Ethylene oxide
Gamma rays—50KGY

Specification Parameters

SPECIFICATION MODEL INTERNAL DIAMETER(ID) OUTSIDE DIAMETER(OD) WALLTHICKNESS LENGTH(M/PKG)
1*1 AY2491789 1 3.2 1.1 50M
2*1 AY21X2161 2 4 1 100M
3*1 AY2491517 3 5 1 50M
4*1 AY21X1518 4 6 1 100M
2.79*0.85 AY202359 2.79 4.49 0.85 30M
2.06*0.86SSS - 2.06 3.78 0.86 12PCS/PACK
2.79*0.86SSS - 2.79 4.51 0.86 12PCS/PACK
0.51*0.86SSS - 0.51 2.23 0.86 6PCS/PACK

Product Packaging

Individually packaged in original cartons in compliance with GMP regulations
Use packaging bags that do not contain phthalates